What We Do

Real Fab Work for Equipment, Industry, and More

Not everything can be fixed with a bolt-on part. Sometimes you need something built from scratch, modified to fit, or repaired in a way that will actually hold. That's what the shop in Marshville is for. Customers bring in broken equipment components, custom project ideas, or parts they need fabricated to spec. Matt has the welders, cutting equipment, and workspace to take it from raw steel to finished piece - all under one roof.

Good fabrication is about more than just melting metal together. It takes proper fit-up, the right filler material for the base metal, correct heat input, and knowing how the finished piece is going to perform in the field. Working in a shop environment means better control over every step - from initial layout and cutting to final weld-out and inspection. Matt has been doing this work long enough to know what holds and what doesn't.

If you've got a project that needs a fabricator who actually knows what they're doing, give him a call. Whether it's a broken equipment component that needs to be repaired or rebuilt, a custom bracket or attachment, structural metalwork for your property, or something you just can't find as a stock part - the shop in Marshville is set up to handle it.

Call (704) 291-0286

Metal fabrication work in progress at 704 Diesel shop in Marshville NC

Services Included

Fabrication Work We Handle

Every project is a little different. Here's a look at the types of work that come through the shop.

Equipment Component Repair and Rebuild

Cracked booms, broken buckets, bent frames, fractured mounting tabs - if the base structure is still good, we can often repair or rebuild the damaged section instead of replacing the whole thing.

Custom Brackets and Mounts

Need a mounting bracket that doesn't exist as a stock part? Or a custom attachment mount for a piece of equipment? We design and build them to fit your specific application.

Structural Steel Fabrication

Frames, supports, skids, and other structural builds done in the shop. Properly fitted, properly welded, and built to handle the loads you're going to put on them.

Cutting Edges and Wear Plates

Worn cutting edges on blades and buckets can be replaced or hard-faced in the shop to restore performance and extend the life of your ground-engaging tools.

Weld Repairs and Reinforcement

Cracked welds, stress fractures, and structural repairs done correctly - with proper prep, the right filler, and enough heat to actually fuse the base metal instead of just painting over the crack.

Custom One-Off Projects

Have something in mind that doesn't fit a standard category? Bring the idea and the parts. If it can be fabricated from steel, there's a good chance it's something Matt can build.

How It Works

From Your Idea to a Finished Part

The fab process depends on the project, but the basics are always the same - clear communication, honest pricing, and work done right.

Call or Bring It In

Call ahead or stop by the shop in Marshville with the broken part, a sketch, or just a description of what you need. If you can bring the actual piece, that's usually the fastest way to get a clear picture of the job.

Assess and Quote

Matt looks at what's needed, figures out the best approach, and gives you a straight quote. No vague estimates that balloon later - just an honest number based on the materials and time involved.

Fabrication in the Shop

The work gets done in the shop with proper equipment - layout, cutting, fitting, welding, and finishing. Working inside means better control over every step, and every piece is built with the end application in mind so it holds up the way it needs to.

Inspect, Pick Up, or We Bring It Back

Once the project is done, you can pick it up from the shop or we can coordinate getting it back to you or installed on your equipment. Either way, you'll know exactly what you're getting before you take it.

Custom fabrication and welding services at 704 Diesel in Marshville NC

Why Choose Us

Fabrication That Actually Holds Up

There's a big difference between a weld that looks okay and a weld that's actually strong. Matt has been welding and fabricating long enough to know the difference, and he's not interested in sending something out the door that's going to fail under load. The shop in Marshville is fully equipped for everything from small repair jobs to larger structural builds - angle iron, plate, tubing, and more. Every project gets the same attention to fit-up, prep, material selection, and execution.

Full in-shop fabrication setup with welders, cutting equipment, and proper workspace
Experience with structural steel, equipment components, and industrial fab work
Correct material selection and welding process for each application
Honest quotes with no surprise charges when you come to pick up
Weld repairs, component rebuilds, and fully custom builds all handled in the same shop
Located in Marshville, NC - customers bring parts, components, and equipment directly to the shop for fabrication and weld repair
Can combine fab work with diesel mechanical repairs in one visit

(704) 291-0286 Request a Quote

FAQ

Metal Fabrication Questions

A few things people often ask before bringing a project to the shop.

What materials do you work with?

Primarily mild steel, but also high-strength steel, AR plate, and other common structural materials. If you're working with something specific or unusual, just mention it upfront and Matt can confirm whether it's something the shop is set up to handle.

Can you fabricate replacement parts for heavy equipment?

Yes. Replacement buckets, boom tips, mounting brackets, cylinder mounts, wear plates, and other equipment components can often be fabricated in the shop when OEM parts aren't available, are discontinued, or are just way more expensive than a custom-built replacement.

Do you do welding repairs as well as new fabrication?

Both. Weld repairs - cracks, broken tabs, stress fractures, reinforcement work - are a big part of what comes through the shop. New fabrication and repair work are handled with the same care and the same standards.

Can I bring just a broken part instead of the whole machine?

Absolutely - and that's usually the preferred way. Pull the broken component and bring it to the shop in Marshville. Matt can look at it directly, get accurate measurements, and work on it properly with full shop access. If removing the piece isn't practical, he can assess the repair on the full machine when it's dropped off at the shop.

How long does fabrication work typically take?

It really depends on the complexity of the project and what else is in the queue. Simple repairs can often be turned around quickly. Larger custom builds take more time. Matt will give you a realistic timeline upfront so you can plan around it.

Do you work on agricultural equipment as well as construction equipment?

Yes. Farm equipment, hay equipment, loader attachments, and agricultural structures all come through the shop. If it's made of steel and something is broken, bent, or needs to be built, it's worth a call.

Get in Touch

Got a Fabrication Project? Let's Talk.

Call (704) 291-0286 or shoot a message. Tell Matt what you need built or fixed and he'll let you know what it'll take.

(704) 291-0286 Get a Free Quote

Mon-Fri 7am-5pm • Serving a 50-mile radius from Marshville, NC

Custom Metal Fabrication Built Right